 |
|
|
Untitled Document
|
R122-Series Hose of PTFE | |
|
|
These PTFE hoses are designed for use with petroleum, synthetic, and water base
hydraulic fluids. Applications include flexible brake lines (including ABS, ESP)
and Hydraulics. | |
INNERCORE PTFE is inert to automotive fluids and has been proven to be a most effective
barrier to the effusion of hydrocarbons. The innercore also has a precisely controlled
amount of carbon black added to the PTFE. This provides a continuous conductive
path when assembled with metal end fittings, preventing the occurrence of electro-static
discharge (ESD).
REINFORCEMENT The braid material is type 300 Series Stainless Steel for superior strength
and corrosion resistance. |
SLEEVING
Coextruded jackets are available for added abrasion resistance and product labeling.
TEMPERATURE RANGE
-40o C to +204o C� (-40o F to +400o F) for continuous service.� �54� C to +230�
C (-65� F to +445� F) for intermittent service.
STANDARDS
PTFE ASTM D4895: Type I, Grade 4, Class
ASTM D1457: Type III, Grade 2, Class B
WIRE - AISI Type 304 Stainless Steel
(SAE 30304, UNS S30400) |
SPECIFICATIONS
Titeflex Hose
Part Number
(Metric OD
�tube size) |
Nominal
I.D.
Inches
(mm) |
Nominal
O.D.
Inches
(mm) |
Minimum
Burst @
Room Temp
PSI (BAR) |
Minimum
Bend Radius *
(SAE J517 100R14)
Inches (mm) |
Hose
Weight
lb/ft
(kg/m) | |
R122-4
(4.76 tube) |
0.1965
(5.0) |
0.3115
(7.9) |
12,000
(828) |
2
(50) |
0.063
(0.09) | |
R122-5.6
(6.0 tube) |
0.234
(5.9) |
0.351
(8.9) |
12,000
(828) |
3
(75) |
0.074
(0.11) | |
R122-5
(6.35 tube) |
0.255
(6.5) |
0.370
(9.4) |
12,000
(828) |
3
(75) |
0.082
(0.12) | |
R122-6
(8.00 tube) |
0.318
(8.1) |
0.433
(11.0) |
10,000
(690) |
4
(100) |
0.101
(0.15) | |
R122-6T
(9.53 tube) |
0.384
(9.8) |
0.499
(12.7) |
7,500
(517) |
5
(127) |
0.106
(0.16) | |
R122-8
(10.00 tube) |
0.410
(10.4) |
0.524
(13.3) |
7,500
(517) |
5.25
(133) |
0.118
(0.18) | |
R122-10
(12.70 tube) |
0.504
(12.8) |
0.621
(15.8) |
6,000
(414) |
6.5
(165) |
0.157
(0.23) |
*Note on minimum bend radius: Value is as tested per SAE J517 100R14, smaller
radii may be used pending parameters for temperature, impulse value, and cycle
rate. |
|
R149 Series Hose of�PTFE | |
|
Hose Construction
These PTFE hoses are designed for use with nylon - coated rigid tube per�GM6405M.
The inside diameter is�larger than the�R122 series to accomodate the�nylon coated
tube.� | |
INNERCORE� PTFE is inert to automotive fluids and has been proven to be a most effective
barrier to the effusion of hydrocarbons.� The innercore also has a precisely controlled
amount of carbon black added to the PTFE.� This provides a continuous conductive
path when assembled with metal end fittings, preventing the occurrence of electro-static
discharge (ESD).
REINFORCEMENT� The braid material is type 300 Series Stainless Steel for superior strength
and corrosion resistance. |
SLEEVING
Coextruded jackets are available for added abrasion resistance and product labeling.
TEMPERATURE RANGE
-40o C to +204o C� (-40o F to +400o F) for continuous service.� �54� C to +230�
C (-65� F to +445� F) for intermittent service.
STANDARDS
PTFE � ASTM D4895: Type I, Grade 4, Class B
���������� ASTM D1457: Type III, Grade 2, Class B
WIRE - AISI Type 304 Stainless Steel
���������� (SAE 30304, UNS S30400) |
SPECIFICATIONS
|
Titeflex Hose
Part Number
(Metric OD
�tube size) |
Nominal
�I.D.
�Inches
�(mm) |
Nominal
O.D.
�Inches
�(mm) |
Minimum
Burst @
Room Temp
�PSI (BAR) |
Minimum
Bend Radius*
(SAE J517
100R14)
In (mm) |
Hose
�Weight
lb/ft
(kg/m) | |
�R149-4
(4.76 tube) |
�0.210
(5.3) |
�0.325
(8.3) |
�12,000
(828) |
�2
(50) |
�0.065
(0.10) | |
R149-5
(6.35 tube) |
�0.268
(6.7) |
�0.383
(9.7) |
�12,000
(828) |
3
(75) |
�0.084
(0.12) | |
R149-6
(8.00 tube) |
�0.327
(8.3) |
�0.442
(11.2) |
�10,000
(690) |
�4
(100) |
�0.101
(0.15) |
*Note on minimum bend radius: Value is per SAE J517 100R14, smaller radii may
be used pending parameters for temperature, impulse value, and cycle rate. |
|
|
